6
6-24
1
1
2
1
2.
3.
4.
5.
Remove the burn out light bulb by
pushing it in and turning it
counterclockwise.
Insert a new light bulb into the
socket, push it in, and then turn it
clockwise until it stops.
Install the screw and lampshade.
If the lampshade cannot be
removed or installed, suggest
removing the surrounding parts.
1.
2.
Place the motorcycle on the
centerstand.
Disconnect the speedometer cable
from the front wheel.
1. Remove the screw, lampshade on
both sides of the hook pulling slightly
outward, remove the lampshade.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a rear turn signal light /
tail light / brake light bulb
1. Screw
1. Hook (x2)
2. Lampshade
NOTICE
Do not over tighten the screw,
otherwise the lens may break.
Front wheel
To remove the front wheel
WARNING
1. Speedometer cable
Better give to Yamaha dealer to
repair the wheel.
To avoid injury, securely support
the vehicle so there is no danger
of it falling over.
