6
6-8
8.
1
2
10 Nm
20 Nm
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Oil filter element
2. O-ring
1. Bolt
2. Oil filter element cover
Remove and replace the oil filter
element and O-ring.
5.
Install the oil filter element cover by
installing the bolts, then tightening
them to the specified torque.
6.
Tightening torque:
Engine filter element cover bolt:
TIP
Make sure that the O-ring is properly
seated.
Install the engine drain bolt, and
then tighten the drain bolt to the
specified torque.
7.
Tightening torque:
Engine oil drain bolt:
Add the specified amount of the
recommended engine oil, and then
install and tighten the oil filler cap.
Recommended engine oil:
See page 8-1
Engine oil quantity:
Total amount: 1L
Periodic oil change: 0.80L
In order to prevent clutch slippage
(since the engine oil also lubricates the
clutch), do not mix any chemical
additives.
Make sure that no foreign material
enters the crankcase.
NOTICE
Start the engine, and then let it idle
for several minutes while checking it
for oil leakage. If oil is leaking,
immediately turn the engine off and
check for the cause.
Turn the engine off, and then check
the oil level and adjust it if necessary.
9.
10.
