58
Parameters /
DX7 Edit Panel Window
• Pattern Select buttons
In the Play mode, these are used to select patterns 1-32/65-96 (or 33-64/97-128) on the
DX200. In the Edit mode, the buttons are used to select the Edit parameters (printed in
lavender above the buttons). In the Function mode, they are used to select the Function
parameters (printed in yellow below the appropriate buttons).
The following descriptions explain each button's use in the Edit mode.
• [1] - [6] OPERATOR ON/OFF-EG COPY (1-6)
These buttons have two functions: 1) to turn individual operators on and off while you are
programming a pattern, and 2) to select the operator to which you wish to
certain
(EG) settings.
• [7] ALGORITHM
This button is used to select the
parameter.
• [8] FEEDBACK
This button is used to select the
parameter.
• [9] - [14] LFO
These buttons are used to select the
(Low Frequency Oscillator) parameters.
• [9] WAVE
This is used to select the
parameter.
• [10] SPEED
This is used to select the
parameter.
• [11] DELAY
This is used to select the
parameter.
• [12] PMD
This is used to select the
parameter.
• [13] AMD
This is used to select the
LFO Amplitude Modulation Depth
parameter.
• [14] SYNC
This is used to select the
parameter.
• [15], [16] MOD SENSITIVITY
These buttons are used to select the
parameters.
• [15] PITCH
This is used to select the
parameter.
Содержание DX200 Editor
Страница 80: ...80 Appendix Initial Pattern Default Settings ...
Страница 81: ...81 Appendix Algorithm List Algorithm List ...
Страница 82: ...82 Appendix Algorithm List ...