Yamaha DX200 Editor Скачать руководство пользователя страница 65

Страница: 65 / 82

File Menus

When the DX200 Editor is active and selected, the following functions appear in the File

menu:

• New DX200 File

• Open DX200 File

• Save DX200 File

• Save DX200 File As

These are used for creating, saving, and opening your original DX200 Files. Using the

Save (or Save As) command here saves all 128 User patterns to a selected DX200 File.

(The special .DXC extension allows you to easily organize the files.)

By keeping a library of your original patterns as DX200 Files, you can easily call up the

settings you need (with the Open command) and quickly insert them to a song or trans-

mit them to your tone generator/sound card.

• Before saving a set of User patterns as a DX200 File, make sure to

store

the pattern currently

being edited. If a pattern is not properly stored, it will not be contained in the DX200 File data.

Use this function to create a new DX200 File.

If the currently selected pattern has been edited, the display prompts you to store the

pattern before opening a new DX200 File. (See

Storing a DX200 Pattern

.) The new

DX200 File contains the factory preset 256 patterns. (These are the same patterns that

are automatically loaded when you open the DX200 Editor.)

New DX200 File

Содержание DX200 Editor



















































































Результаты поиска

Содержание DX200 Editor

Отзывы:

Yamaha DX200 Editor, Руководство пользователя, Страница: 65 / 82

Результаты поиска

Содержание DX200 Editor

Отзывы: