USEFUL OPERATION
58
En
– The next time you turn on the system after setting
in the system menu, the system starts with DVD as
an input source.
■
Setting the preset code
You can use the remote control to control the power, TV
input, channel, and volume for up to two components,
such as TV or Set top box (STB). Set the preset codes
depending on the components.
Hint
The preset cords are set to “298” (TV) and “748”
(STB) as the default settings.
1
Switch
TV/STB
to the side you want to set.
2
Press and hold
CODE SET
, then press
POWER
.
3
Point the remote control toward the remote control
sensor on the DVD controller and enter a 3-digit code
while holding
CODE SET
.
Refer to “LIST OF PRESET CODES” on the
appendix for the corresponding codes.
4
Release
CODE SET
.
If the preset cord is set correctly, “PRESET OK!”
appears in the front panel display.
Note
If you have failed to set the preset code, “PRESET
NG!” appears in the front panel display. Try to set it
again.
Hints
– When you select the preset cord for “cable” or
“DBS”, you can use only
POWER
and
CH +/–
. If
a preset cord for “TV” is set on the other side, you
can use
TV VOL +/–
or
TV INPUT
to control TV.
– To set another preset code, switch
TV/STB
to the
other side and repeat the step 2 to step 4.
Operating a TV/STB
Once you set the preset code, you can operate your TV/
STB.
1
Switch
TV/STB
to the side, which the preset code is
set.
2
Press the button you want to operate.
SLEEP
NIGHT
ENHANCER
AUDIO DELAY
AUDIO
ANGLE
SUBTITLE
STEREO
ON SCREEN
ZOOM
ON
OFF
BLUETOOTH
DISP. MODE
GAME
SPORTS
MUSIC
FUNC.
WP87020
DVX-700
TV
STB
POWER
STANDBY/ON
10KEY
MOVIE
A-E
A-E
SETUP
RETURN
CODE SET
ENTER
TV
/
STB
Switches TV or STB.
