60
e
Voice Number Voice Name
[Range]
0, 1-127
Selects the assigned voice. Displays the voice number (
1
-
127
)
and voice name.
If this parameter is set to “
0
”, “
NoAssign
” will appear in the
display and sound will not be produced.
* Refer to the [Drum Voice List] (P. 68).
5-2. Volume, Pan
This function sets the volume
w
and pan
e
(the position in the
stereo field) for each drum voice assigned to each MIDI note num-
ber
q
.
5-4. Layer Balance
When a drum voice assigned to a MIDI note number
q
is made
up of 2 layers (a single voice consisting of 2 voice waves), this
function sets the volume balance between those 2 layers.
* When the selected voice only has a 1 layer, this setting will have
no affect.
Utility Mode
q
N (MIDI Note Number)
Selects the MIDI note number (The same procedure as in [5-1.
Voice]).
w
Vol (Volume)
[Range]
0-127
e
Pan
[Range]
L64 to C to R64.
5-3. Tuning
This function sets the pitch for each drum voice assigned to each
MIDI note number
q
.
q
N (MIDI Note Number)
Selects the MIDI note number (The same procedure as in [5-1.
Voice]).
w
TuneC (Tune Coarse)
[Range]
–24 to 0 to +24
Tuning can be set in increments of a half step.
e
TuneF (Tune Fine)
[Range]
–64 to 0 to +63
Tuning can be set in increments of 1.17 cents.
q
N (MIDI Note Number)
Selects the MIDI note number (The same procedure as in [5-1.
Voice]).
w
LayerBalance (Layer Balance)
[Range]
–64 to 0 to +63,
---
Sets the volume balance between the 2 layers.
* When the selected drum voice only has 1 layer, “
---
” will ap-
pear in the display and settings can not be carried out.
5-5. Decay, Cutoff Frequency
This function sets the drum voice decay, the filter’s cutoff frequency
and adjusts the tone of each voice assigned to each MIDI note
number
q
.
q
N (MIDI Note Number)
Selects the MIDI note number (The same procedure as in [5-1.
Voice]).
w
Decay
[Range]
–64 to 0 to +63.
Negative values will produce a clearer sound.
e
Fc (Cutoff Frequency)
[Range]
–64 to 0 to +63
A positive value will produce a brighter sound, negative values
will produce a rounder sound.
5-6. Reverb Send
This sets the Reverb Send Level
w
for each drum voice assigned
to each MIDI note number
q
.
* The actual reverb send level will be determined by multiplying
the Reverb Send Level set in [5-2. Drum Reverb Send] (P. 47) in
the Drum Kit Voice Edit Mode.
UT
MAP
N=
0C
-2
Vol=
127
Pan=
C
q
w
e
UT
MAP
N=
0C
-2
Tune
C=
0
F=
0
q
w
e
UT
MAP
N=
0C
-2
LayerBalance=---
q
w
UT
MAP
N=
0C
-2
Decay=
0
Fc=
0
q
UT
MAP
N=
0C
-2
Reverb
send=
127
q
w
w
e
Содержание DTXPRESS
Страница 1: ...DRUM TRIGGER MODULE Owner s Manual ...
Страница 62: ...62 MEMO ...
Страница 88: ...V372400 Printed in Japan DTX Information http www yamaha co jp english product drum dtx index html ...