Yamaha DTXPRESS, Руководство пользователя

Страница: 18 / 88

18
The DTXPRESS has a total of 95 preset songs that are good for rhythm practice.
Try and play along with a song.
While setting the Rhythm Mute, a “ ˚ ” will be displayed at the
end of the song name.
Play Along with a Song
1. Select a Song
Select one of the DTXPRESS’ songs and listen to it. Song
numbers 1-95 are preset songs that have been created by
Yamaha.
m
[Preset Song List] (P. 79)
Press the [PLAY] button to display the Drum Kit & Song display.
Use the [SEL
<
]/[SEL
>
] buttons to move the flashing cursor
to the song number, then use the [VALUE–]/[VALUE+] but-
tons to select the song.
KIT =1 Acoustic
SONG=1 Latiniq
* When a song is switched, the drum kit also changes to a kit
that is set for that song.
2. Listen to the Song
When the [START/S] button is pressed, the song will start play-
back from the beginning.
The [SONG] lamp in the button will light on the first beat of
each measure.
KIT =1 Acoustic
SONG=1 Latiniq
Song Number Song Name
The song will stop when it reaches the end.
You can stop the song during playback by pressing the [START/
S] button.
* Some songs repeat.
To cancel the Rhythm Mute, hold the [SHIFT] button and press
the [PAGE
s
] button again.
HINT
The mute function can be used during song playback.
To cancel the Mute, hold the [SHIFT] button and press the
[PAGE
s
] button again.
4. Adjust the Song Volume
The song volume is adjusted with the ACCOMP VOL knob.
Use both the ACCOMP VOL knob and the POWER/VOL knob
(overall volume of song and pads) to adjust the balance be-
tween the song and your drum part.
5. Change the Song’s Tempo
Hold the [SHIFT] button and press the [PAGE
t
] button to
display the Tempo Setting display.
In the same manner as the metronome, use the [SEL
<
]/
[SEL
>
] to move the flashing cursor to the Tempo value, then
use the [VALUE–]/[VALUE+] buttons to set the desired tempo
(
q
=30-300).
KIT =1 Acoustic
SONG=1 Latiniq˚
Indicates the
Rhythm Mute
TRIG =1 Medium
ƒ=110=--= 4/4=ƒ
Tempo Value
Press the [PAGE
s
] button to return to the original display
(Drum Kit & Song setting display).
6. Play Along with the Click Voice
With the drum part muted, it may be a little difficult to keep
time. In this case, use the metronome along with the song.
Using the click voice as a reference will make it easier to play
along with the song.
Press the [CLICK] button to start the metronome. It will be in
tempo with the song. Press the [CLICK] button again to stop
the metronome.
The Click Voice’s volume can be adjusted using the CLICK
VOL knob.
HINT
Before song playback, you can have the metronome
give a two-measure count. (
m
Utility Mode [3-5.
Count Switch] Reference Guide : P. 33)
3. Mute a Drum Part
Try playing along with the song.
Hold the [SHIFT] button and press the
[PAGE
s
] button, then press the
[START/S] button to playback the
song. A drum part in the song will be
muted (does not produce the part)
(Rhythm Mute Function).
You will play the drum part.