Yamaha DTXPRESS, Руководство пользователя

Страница: 37 / 88

37
1-3. Velocity Curve
This function sets the MIDI Velocity Curve for the sensitivity for
each input jack
q
.
1-5. Specific Rejection
This function prevents cross talk from occurring between two speci-
fied input jacks
q
and
e
.
q
TRIG IN (Trigger Input Number)
Assigns the trigger input jack number (the same procedure as in
[1-1. Pad Type]).
w
VelCurve (Velocity Curve)
Sets the Input Velocity Curve for the trigger input jack assigned in
TRIG IN
q
.
1-4. Self Rejection, Rejection
This function is used to prevent double triggers * and cross talk
(mixed input signals between the jacks) for each input jack
q
.
* double trigger: When 2 sounds are played at the same time.
q
TRIG IN (Trigger Input Number)
Assigns the trigger input jack number (the same procedure as in
[1-1. Pad Type]).
w
SelfRej (Self Rejection)
[Range] 0-9
Prevents double triggers from occuring in the input jack assigned
in TRIG IN
q
. After an event is detected, further events will be
automatically muted for a certain length of time. Larger values set
longer times.
e
Rej (Rejection)
[Range] 0-9
Prevents cross talk from occuring in the input jack assigned in
TRIG IN
q
. Events triggered by other pads (input jacks) that are
of a lower input value than what is set here will not be delivered
for a set length of time.
q
TRIG IN (Trigger Input Number)
Assigns the trigger input jack number (the same procedure as in
[1-1. Pad Type]).
w
SPCRej (Specific Rejection)
[Range] 0-9
After an event occurs from the pad from the input jack assigned in
e
, the pad of the input jack assigned in TRIG IN
q
will not
sound for a certain length of time unless the level is greater than
the value assigned here.
e
frm (Assigned Destination Trigger Input Number)
[Range] 1-10, 6&7
Sets the destination trigger input jack number of the pad that will
be rejected. When “
6&7 ” is selected, both trigger inputs 6 and 7
will be assigned.
1-6. Trigger Setup Copy
This function copies all data settings in [1-1. Pad Type] to [1-5.
Specific Rejection] from input jack
q
to another input jack
w
.
When the Trigger Setup Copy operation is carried
out, the trigger setup data will be replaced with the
settings of the copy source.
q
TRIG IN (Trigger Input Number)
Sets the trigger input jack number (1-10) of the pad copy source.
w
Copy to Input (Trigger Input Number Copy Destination)
Sets the trigger input jack number (1-10) of the copy destination.
Procedure
1. In the display shown above, assign the copy source and
copy destination, press the [SAVE/ENT] button. The fol-
lowing display will appear asking for confirmation before
the copy operation is carried out.
TRIG IN= 1
VelCurve= normal
w
q
TRIG IN= 1
SelfRej=2 Rej= 3
w e
q
TRIG IN= 1
SPCRej=0 frm= 1
q
e
TRIG IN= 1
Copy to Input= 1
w
q
Trigger Setup Edit Mode
normal hard 2 hard 1 loud1 loud 2
Input Copy to 1
Are you sure ?
2.
Press the [SAVE/ENT] or [VALUE+] button, the copy
operation will be carried out.
* Press the [VALUE-] button to cancel the copy operation.
When the copy operation is complete, “ Complete! ” will appear.
w
Strength
of hit
m
V
elocity
m