E-
80
REMOTE CONTROL FEATURES
Clearing learned functions, macros, renamed source names, and setup
manufacturer codes
You can reset the remote control to its factory setting by clearing the changed Libraries, programmed macros, set manufacturer codes and
learned functions.
1
1
Press CLEAR by using a ballpoint pen or similar
object.
Caution
• If you do not press any button within 30 seconds after step 1,
the clearing process is canceled. If this happen, start over
from step 1.
2
2
Press / to select the clear mode.
There are six clearing modes as shown below.
L:(name of a component) :
Clears all learned functions for the component area.
Press the input selector button to select the compo-
nent.
L:AMP :
Clears all learned functions for this unit control
area.
L:ALL :
Clears all learned functions.
M:ALL :
Clears all programmed macros.
RNAME :
Clears all renamed source names in the display
window.
FCTRY :
Clears all programmed functions including setup
manufacturer codes. This returns to the factory
settings.
TRANSMIT
RE–NAME
CLEAR
LEARN
MACRO
OFF
ON
MACRO
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CABLE
SAT
MD/TAPE
CD–R
CD
D–TV/LD
VCR 1
VCR 2
VCR3/DVR
DVD
6CH INPUT
TITLE
SOURCE
SEARCH
POWER
STOP
PAUSE
PLAY
REC
CHAPTER
SELECT
ENTER
DISPLAY
MENU
SOUND
1, 3, 4
2
CLEAR
CLEAR
ENTER
3
3
Press and hold CLEAR again for about 3 seconds.
“C:OK” appears in the display window.
Caution
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
4
4
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro for a
button, the button reverts to the factory setting.
Caution
• “ERROR” appears in the display window under the following
circumstances:
1
when pressing a button other than the cursor and
ENTER
2
when pressing more than one button at once
3
when
MACRO ON/OFF
,
10KEY/DSP
or
PARAMETER/
SET MENU
is switched to another position
CLEAR
C:OK
CLEAR
