Yamaha DSP-AZ1, Руководство пользователя

Страница: 8 / 110

E-
6
CONTROLS AND FUNCTIONS
Front panel
STANDBY
/ON
INPUT MODE
INPUT SELECTOR
VOLUME
SPEAKERS
BASS
SILENT
PHONES
A B
NEXT
PROCESSOR
DIRECT
BASS
EXTENSION
6CH
INPUT STEREO
EFFECT
ON
S VIDEO VIDEO
OFF
L R
PHONO
CD
TUNER
CD–R
MD/TAPE
DVD
SOURCE/REMOTE
D–TV/LD
CABLE
SAT
VCR 1
VCR 2
VCR 3/DVR
VIDEO AUX
SET MENU
TREBLE
VIDEO AUX
L AUDIO OPTICAL R
BALANCE
REC OUT/ZONE 2
PROGRAM
1 2 3 4 5 6 7 8 9 0 q w e r t
y u i o p
1
STANDBY/ON
Turns this unit on (On mode) and off (Standby mode). When you
turn on this unit, you will hear a click and there will be a 4 to
5-second delay before this unit can reproduce sound.
In Standby mode, this unit consumes a small amount of power so it
can respond to the remote control.
2
INPUT MODE
Selects the mode of input for sources that output two or more types
of signals to this unit (see page 44).
Caution
• You cannot control the input mode when you select 6CH INPUT
as the input source.
3
INPUT SELECTOR
Selects the input source ( D-TV/LD , CABLE , SAT , VCR 1 , VCR 2 ,
VCR3/DVR , V-AUX , DVD , MD/TAPE , CD-R , TUNER , CD ,
PHONO ) you want to listen to or watch (see page 42).
4
Remote control sensor
Receives signals from the remote control.
5
SPEAKERS A/B
When pushed in (ON), these buttons turn on the set of main
speakers connected to the
A and/or B terminals on the rear panel.
6
Front panel display
Shows information about the operational status of this unit (see
page 11).
7
SET MENU +/–
Adjusts the settings and parameter values of SET MENU items.
8
PROCESSOR DIRECT ON/OFF
When pushed in (ON), BASS , TREBLE , BALANCE , and BASS
EXTENSION
are bypassed, eliminating any alteration of the
original signal.
9
NEXT
Displays SET MENU items. This button works like on the remote
control when using the SET MENU (see page 53).
0
6CH INPUT
Switches between 6CH INPUT mode and normal input modes. 6CH
INPUT mode takes priority over the source selected with
INPUT
SELECTOR .
You cannot use DSP sound field programs while using an external
decoder.
q
STEREO/EFFECT
Switches the effect speakers (center, front effect, rear and rear
center) on and off. If you turn off the output of these speakers using
STEREO/EFFECT , all DTS and Dolby Digital audio signals are
directed to the main left and right channels except for the LFE
channel.
Cautions
• When DTS or Dolby Digital signals are mixed, the left and right
main channel signal levels may not match.
• If “1B MAIN SP” on the SET MENU is set to “SMALL” and “1E
LFE/BASS OUT” is set to “SW”, or “1E LFE/BASS OUT” is set
to “BOTH”, the LFE signals will be output from the subwoofer.