background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-4

6

* Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.

EAU03206

NOTE:

The annual checks must be performed every year except if a 6,000 km or 12,000 km maintenance is performed instead.

The air filter needs more frequent service if you are riding in unusually wet or dusty areas.

Hydraulic brake service

• Regularly check and, if necessary, correct the brake fluid level.
• Every two years replace the internal components of the brake master cylinder and caliper, and change the brake fluid.
• Replace the brake hoses every four years and if cracked or damaged. 

25

*

Air induction system

• Check the air cut valve and reed valve for damage.
• Replace the entire air induction system if necessary.

26

*

Lights, signals and 
switches

• Check operation.
• Correct if necessary.
• Adjust headlight beam if necessary.

NO.

ITEM

CHECKS AND MAINTENANCE JOBS

Initial

1,000 km

Every

Every

Annual

check

6,000 km 12,000 km

E_5KS.book  Page 4  Monday, August 21, 2000  10:48 AM

Содержание Drag Star XVS1100









































































































Отзывы: