Yamaha Drag Star XVS1100 Скачать руководство пользователя страница 30

Страница: 30 / 104

INSTRUMENT AND CONTROL FUNCTIONS

3-13

Rider seat
To remove the rider seat

1. Remove the passenger seat.
2. Remove the bolt, and then pull the

rider seat up.

To install the rider seat

1. Insert the projections on the front

of the rider seat into the holders as
shown, place the seat in the origi-
nal position, and then install the
bolt.

2. Install the passenger seat.

NOTE:

Make sure that the seats are properly
secured before riding.

EAU00260

Helmet holder

To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.

EW000030

WARNING

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.

1. Bolt

XVS1100A

1. Projection (

2. Seat holder (

XVS1100A

1. Helmet holder

E_5KS.book Page 13 Monday, August 21, 2000 10:48 AM

Содержание Drag Star XVS1100









































































































Результаты поиска

Содержание Drag Star XVS1100

Отзывы:

Yamaha Drag Star XVS1100, Руководство пользователя, Страница: 30 / 104

Результаты поиска

Содержание Drag Star XVS1100

Отзывы: