manualshive.com logo in svg

Yamaha Drag Star XVS1100, Руководство пользователя, Страница: 75 / 104

Поделиться
Скачать
Yamaha Drag Star XVS1100 Скачать руководство пользователя страница 75

PERIODIC MAINTENANCE AND MINOR REPAIR

6-26

6

EAU00800

Battery 

This motorcycle is equipped with a
sealed-type (MF) battery, which does
not require any maintenance. There is
no need to check the electrolyte or to
add distilled water.

EC000101

CAUTION:

@ 

Never attempt to remove the battery
cell seals, as this would permanent-
ly damage the battery. 

@

EW000116

WARNING

@ 

●

Electrolyte is poisonous and
dangerous since it contains sul-
furic acid, which causes severe
burns. Avoid any contact with
skin, eyes or clothing and al-
ways shield your eyes when
working near batteries. In case
of contact, administer the fol-
lowing FIRST AID.

• EXTERNAL: Flush with plenty

of water.

• INTERNAL: Drink large quan-

tities of water or milk and im-
mediately call a physician.

• EYES: Flush with water for

15 minutes and seek prompt
medical attention.

●

Batteries produce explosive hy-
drogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed
space.

●

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN. 

@

E_5KS.book  Page 26  Monday, August 21, 2000  10:48 AM

Содержание Drag Star XVS1100









































































































Отзывы:

Нет отзывов