DME32
27
FLASH ROM UPGRADE
1.
Turn on the power with press and hold [STORE] and [0] keys
on DME32.
LCD Display on DME32.
2.
Press [RECALL] key on DME32.
Then, wait until display showing the following.
3.
Transmit “DME.bin” files.
Set up port of communication soft on PC. (ex. HyperTerm)
like follows.
Bits per seconds
: 38400
Data bits
: 8
Parity
: None
Stop
: 1
Transfer procedure
: X-modem
4. “
>” are shown during the file transmitting by each 64 packets
(128byte/packet).
The message after completing the transmit.
5.
Turn off the power. And then Turn on ther power with press
and hold [RECALL] key.
Press [Recall ] key again. Then SRAM will be cleared.
6.
Turn Off/On the power again. Then you can start to use.
System prog Ver.00.07
Install All Ready
System prog Ver.00.07
Flash-R Erasing Now...
System prog Ver.00.07
Please send to Bin file
System Download Ready!
>>>>>>>>>>>>>>
System Download Done
DIAGNOSTICS V1.0
RAM INITIAL. *