Yamaha diversion F Скачать руководство пользователя страница 38

Страница: 38 / 104

Instrument an

control functions

3-24

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch

is set to “ ”.

3. Turn the key on.
4. Shift the transmission into the neutral

position.

5. Push the start switch.

Does the engine start?

With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.

Does the engine stall?

After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.

Does the engine start?

The system is OK.

The motorcycle can

be ridden.

The neutral switch may not be working
correctly.

The motorcycle should not be ridden

until checked by a Yamaha dealer.

The sidestand switch may not be
working correctly.

The motorcycle should not be ridden

until checked by a Yamaha dealer.

The clutch switch may not be working
correctly.

The motorcycle should not be ridden

until checked by a Yamaha dealer.

WARNING

• The vehicle must be placed on the

centerstand during this inspection.

• If a malfunction is noted, have a

Yamaha dealer check the system
before riding.

YES

UBS1E0E0.book Page 24 Thursday, October 8, 2015 3:40 PM

Содержание diversion F









































































































Результаты поиска

Содержание diversion F

Отзывы:

Похожие инструкции для diversion F

Бренды по названию

Популярные бренды

Yamaha diversion F, Руководство пользователя

Результаты поиска

Содержание diversion F

Отзывы:

Похожие инструкции для diversion F

Бренды по названию

Популярные бренды