Yamaha Disklavier, Руководство по продвинутой эксплуатации

Страница: 106 / 121

Appendix
MIDI Data Format
9
<Table 1-5>
MIDI Parameter Change table (DRUM SETUP) [XG]
Address Size Data Parameter Description Default
(H) (H) (H) (H)
3n rr 00 1 00 - 7F PITCH COARSE -64 - +63 40
3n rr 01 1 00 - 7F PITCH FINE -64 - +63 [cent] 40
3n rr 02 1 00 - 7F LEVEL 0 - 127 Depends on the note
3n rr 03 1 00 - 7F ALTERNATE GROUP 0/OFF, 1 - 127 ’’
3n rr 04 1 00 - 7F PAN 0/random, 1/L63 - 64/C - 127/R63 ’’
3n rr 05 1 00 - 7F REVERB SEND 0 - 127 ’’
3n rr 06 1 00 - 7F CHORUS SEND 0 - 127 ’’
3n rr 07 1 00 - 7F VARIATION SEND 0 - 127 7F
3n rr 08 1 00 - 01 KEY ASSIGN 0/SINGLE, 1/MULTI 00
3n rr 09 1 00 - 01 Rcv NOTE OFF 0/OFF, 1/ON Depends on the note
3n rr 0A 1 00 - 01 Rcv NOTE ON 0/OFF, 1/ON 01
3n rr 0B 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
3n rr 0C 1 00 - 7F FILTER RESONANCE -64 - +63 40
3n rr 0D 1 00 - 7F EG ATTACK RATE -64 - +63 40
3n rr 0E 1 00 - 7F EG DECAY1 RATE -64 - +63 40
3n rr 0F 1 00 - 7F EG DECAY2 RATE -64 - +63 40
TOTAL SIZE 10
[Note]
n: Drum number (0 - 1)
rr: note number (0D - 5B)
When XG system on or GM mode on messages are received, all Drum Setup parameters are initialized.
The Drum Setup Reset message can be used to initialized each Drum Setup parameter.
Selecting a Drum Set will cause the Drum Setup parameter values to be initialized.
p m u D k l u B
s s e r d d A n o i t p i r c s e D
) H ( ) M ( ) L (
R E S U 1 1 0 0 0 0 1 e c i o V l a m r o N r e s U
L A M R O N :
E C I O V 0 0 F 1 0 0 2 3 e c i o V l a m r o N r e s U
<Table 2-1>
Parameter Bass Address
Model ID = 4B [QS300]
<Table 2-2>
MIDI Bulk Dump table (USER NORMAL VOICE) [QS300]
Address Size Data Parameter Description Default
(H) (H) (H) (H)
[Common]
11 nn 00 17D 20-7E Voice Name
:
07
08
not used
: ”
0A ”
0B 01-03 Element Switch 1:Element 1 on, 2:Element 2 on, 3:Element 1 and 2 on
0C 00-7F Voice Level
0D not used
: ”
3C ”
[Element 1]
3D 00-7F Wave Number High bit13-bit7
3E 00-7F Wave Number Low bit6-bit0
3F 00-7F Note Limit Low
40 00-7F Note Limit High
41 00-7F Velocity Limit Low
42 00-7F Velocity Limit High
43 00-01 Filter EG Velocity Curve
44 00-02 LFO Wave Select 0:saw, 1:tri, 2:S&H
45 00-01 LFO Phase Initialize 0:OFF, 1:ON
46 00-3F LFO Speed
47 00-7F LFO Delay
48 00-7F LFO Fade Time
49 00-3F LFO PMD Depth
4A 00-0F LFO CMD Depth
4B 00-1F LFO AMD Depth