Yamaha disklavier Mark IV Series Скачать руководство пользователя страница 12

Страница: 12 / 76

Important Precautions

Read the following before operating the Disklavier.

Warning

• Do not locate the Disklavier in a place subject to

excessive heat, low temperatures, or direct sunlight.

This could be a fire hazard and may damage the finish

and internal parts.

• Excessive humidity or dust can lead to fire or electric

shock.

• Connect the plug on the Disklavier power cable to a

compatible AC outlet. Failure to do so will present a

fire and electric shock hazard. If the power cable plug

is not compatible with your AC outlet, consult your

dealer.

• Do not plug several devices into the same AC outlet.

This can overload the AC outlet, and lead to fire and

electric shock hazard. It may also affect the

performance of some devices.

• Do not place heavy objects on the power cable. A

damaged power cable is a potential fire and electric

shock hazard. If the power cable runs under a carpet,

make sure heavy objects, including the Disklavier, are

not placed on top of the cable.

• If the power cable is damaged (i.e. cut or a bare wire is

exposed), ask your dealer for a replacement. Using the

Disklavier in this condition is a fire and shock hazard.

• When disconnecting the power cable from an AC

outlet, always pull by the plug. Never pull the cable.

Damaging the cable in this way is a potential fire and

electric shock hazard.

• The cover of the unit should be removed only by

qualified service technicians.

• Do not place liquid containers such as vases, potted

plants, glasses, cosmetic bottles, medicines, etc., on top

of the Disklavier.

• Do not try to modify the Disklavier, as this could lead

to fire or electric shock hazard.

• When moving the Disklavier to another location, turn

off the power, remove the power plug from the AC

outlet, and remove all cables connected to external

devices.

Cautions

• Turn off all audio devices when connecting to the

Disklavier. Refer to the user’s guide for each device.

Use the correct cables and connect as specified.

• Set the volume level on all the devices to minimum

before applying power.

• Do not play the Disklavier at a high volume for

extended periods; you may damage your hearing. This

is especially important when using headphones. If you

think your hearing ability is impaired, consult your

doctor.

• If the Disklavier is worked extremely hard — that is,

prolonged playback of very “busy” songs — the

Disklavier’s thermal relay may trip. The thermal relay

will automatically reset when the Disklavier has cooled

down.

• If you notice any abnormality — such as smoke, odor,

or noise — turn off the Disklavier immediately, and

remove the power plug from the AC outlet. Consult

your dealer for repair.

AdvancedManual.book Page ii Friday, May 23, 2008 11:45 AM

Содержание disklavier Mark IV Series













































































Результаты поиска

Содержание disklavier Mark IV Series

Отзывы:

Похожие инструкции для disklavier Mark IV Series

Бренды по названию

Популярные бренды

Yamaha disklavier Mark IV Series, Руководство по эксплуатации

Результаты поиска

Содержание disklavier Mark IV Series

Отзывы:

Похожие инструкции для disklavier Mark IV Series

Бренды по названию

Популярные бренды