Yamaha disklavier Mark III Series Скачать руководство пользователя страница 75

Страница: 75 / 83

English Chapter 14: Using the PianoSmar

t Featur

Stopping Playback

Press [STOP].

Playback stops and the song returns to the

beginning.

Pressing [STOP] while in Pause mode

cancels Pause mode.

Note:

Unlike regular MIDI song playback,

the following restrictions apply to the

CD playback function.

• You cannot change the playback

tempo of songs on CDs.

• You cannot hear the MIDI sound

during fast forward or reverse of the

sound. When the normal playback

mode has been established, the MIDI

sound is simultaneously played back

properly as well.

• During PianoSmart playback, the

sound is played back with the CD

pitch adjusted to the pitch of the live

piano (TG Master Tune value). The

CD pitch is automatically adjusted to

the pitch of the live piano, and the

CD playback is heard as monaural

sound.

☛

See “Tuning the Tone Generator (TG Master

Tune)” on page 48.

PianoSmart Manual
Adjustment

Compensation can be performed manually in the

case of CDs for which automatic adjustment is

not performed successfully (such as ones whose

tempo cannot be adjusted or ones which, once in a

while, fail to play back).

Specify the SPS disk and target
CD, and check that “PS@” appears
on the song name display.

Press [

] twice (or three times in

the Silent mode), and return to
the last but one screen.

[

***] indicates the status.

MEASURING

The SPS adjustment

value has not been

recorded.

REGISTERED

The SPS adjustment

value has been recorded.

MANUAL

The SPS adjustment

value is set manually.

Note:

“REGISTERED” appears in this

context since automatic adjustment has

already been performed once.

Press [+/YES] in the stop status,
and set to “SPS Adjust =
[MANUAL].”

Press [

], and align the cursor

with “Top.”

STOP

Содержание disklavier Mark III Series




















































































Результаты поиска

Содержание disklavier Mark III Series

Отзывы:

Похожие инструкции для disklavier Mark III Series

Бренды по названию

Популярные бренды

Yamaha disklavier Mark III Series, Руководство пользователя

Результаты поиска

Содержание disklavier Mark III Series

Отзывы:

Похожие инструкции для disklavier Mark III Series

Бренды по названию

Популярные бренды