#
After the computer’s operating system has loaded, open the Control Panel and
double-click on the System icon. Select the Device Manager tab and double-click
on CDROM. If the drive has been correctly installed, it should be listed as
shown below. Similarly, double-click on SCSI controllers and the SCSI adapter
card should be listed as shown below if it has been properly installed.
n
For more information about how to use the operating system, refer to the documentation that
came with it.
$
Double-click “YAMAHA CRW6416S” listed under CDROM, and click the
Settings tab. Check the “Sync data transfer” checkbox. With “Sync data
transfer” enabled, the data transfer between your CRW6416S drive and your
computer is synchronized, meaning that the maximum possible data transfer
rate can be achieved.
n
Refer to the documentation that came with your SCSI card for further details.
%
Install the CD writing software.
n
Refer to the documentation that came the CD writing software for further details.
21
Installation
6416S_e15.qx 6/29/99 6:00 PM Page 28
