Yamaha CROSS CONNECT Series, Инструкция по сборке

Страница: 9 / 18

INSTALLING THE INCLUDED PARTS
– 7 –
79
TIP
Install the handlebar
a
so that the brake levers
e
are at a 30

angle to the handlebar, as shown in the
illustration.
TIP
8
Tighten bolts
d
evenly in stages, in the order
shown in the illustration.
8
Tighten in such a way that the gaps
f
above
and below the handlebar holder
c
are equal.
5. Installing the headlight
Install the headlight
a
to the bracket
b
as
shown, then tighten the bolt
c
to the specified
torque.
TIP
Install in such a way that the headlight points down-
ward from horizontal and shines on the road
approximately 33 feet (10 meters) ahead.
6. Installing the front reflector
Install the front reflector
1
in the position
a
shown in the illustration, then tighten it together
with the stay
2
and screw
3
.
TIP
Adjust so that the front reflector
1
faces straight
ahead, then tighten the screw.
a
e
3 0°
d
c
f
f
a
b
c
Tightening torque 7 N·m (0.7 kgf·m, 5.2 lb·ft)
1 2
3
a
1
Front reflector 1 B
2
Stay 1 B
3
Screw 1 B