96
C
Select the record mode.
...............................................................
Press the
[REC]
button.
➔
The [REC] lamp lights and the QUICK RECORD display of
record mode page 1 appears.
Call up page 1 by using the PAGE
[
<
] [
>
]
buttons if the lamp
is lit but the QUICK RECORD display is not shown.
• The song number for recording can be
changed in the QUICK RECORD display.
• If Auto Accompaniment is turned on when
entering the record mode, the
ACMP
&
RHY
track will automatically change to the
REC
display.
V
Select the part for recording.
.................................................
In Quick Recording, three parts can be recorded: the right hand
part (1/RIGHT), the left hand part (2/LEFT) and the Auto Accom-
paniment & rhythm part (ACMP &RHY). Press the appropriate
button —
1/RIGHT
,
2/LEFT
or
ACMP
&
RHY
— to set the part
to
REC
(record enable) or
OFF
(record/playback disabled). The
PLAY
(playback) setting can be selected only for parts which al-
ready contain data.
The
ACMP
&
RHY
part can automatically be set to
REC
by
pressing the panel
[ACMP ON]
button. To record only the
rhythm, leave
ACMP
&
RHY
set to
REC
, then press the
[ACMP
ON]
button so that the lamp goes out.
• Both
1/RIGHT
and
2/LEFT
cannot be set to
REC
at the same time.
Tracks Recorded with Harmony, Dual or Split
Functions
• You can record your performance with har-
mony parts using the Harmony function, or
record two different parts by using the Dual or
Split functions. Harmony is recorded to tracks
6, 7 and 8. When using Dual with recording of
the 1/RIGHT part, data is recorded to tracks 1
and 3; when using Split with recording of the 1/
RIGHT part, data is recorded to tracks 1 and 5.
When using Dual with the 2/LEFT part, data is
recorded to tracks 2 and 4; when using Split
with the 2/LEFT part, data is recorded to tracks
2 and 5.
Tracks Recorded Using Auto Accompaniment
• When recording Auto Accompaniment, the
rhythm is recorded to tracks 9 - 10, bass to
track 11, and chordal backing to tracks 12 - 16.
When a part is set to
REC
(record enable), recording is set to
stand-by and automatically starts when you play the keyboard.
• When the
ACMP
&
RHY
part is set to
REC
, the
metronome will sound to provide a timing guide
in the Synchronized Start mode before record-
ing is started. (The metronome doesn’t sound
when Synchronized Start is released.)
• The Chord Sequence recording method (page
104) lets you record Auto Accompaniment
without having to play chord parts in tempo.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Recording
• When any part is displayed in
REC
, the remain-
ing memory capacity of the disk (in kilobytes)
will appear next to the tempo display. Empty
2DD and 2HD disks should have about 690KB
and 1400KB, respectively. This is room
enough for about 50,000/100,000 notes if no
other data is recorded. When recording is
started, this display is replaced by the measure
number display.
SONG
PAUSE
REW
FF
REC
PLAY/
STOP
SONG CONTROL
