13
Basic Operation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
■
When function is within “soft” rectangle:
...............................
First press the appropriate LCD button under the display (the selected
item is highlighted), and use the data dial or
[–/+]
to set the items which
are in “soft” rectangles with rounded corners.
Alternately, after selecting the item, press the LCD button again.
For example, when selecting a voice from the display shown below,
press the LCD button below
VOICE
▼
▲
at the lower right.
VOICE
then is highlighted, and you can select the desired voice by using the data
dial or the
[–/+]
buttons.
Display Highlight
• When selecting an item or parameter
in the display, the indication of the
selected item is highlighted (appears in
reverse display).
When holding down a button...
• In some cases, when one of the LCD
buttons or [–/+] buttons is held down,
the value or setting changes continu-
ously.
For functions or parameters that have
▼
and
▲
or
<
and
>
indica-
tions, you can reset the value to its basic value by simultaneously press-
ing both LCD buttons (or both
[–/+]
buttons).
• There are some functions and param-
eters whose settings cannot be re-
turned to the basic value even by
pressing the
▼
and
▲
buttons, or the
<
and
>
buttons simultaneously.
■
When function is within “hard” rectangle:
.............................
Items within a “hard” rectangle can be directly selected or switched
ON/OFF by simply pressing the corresponding LCD button located di-
rectly below the desired item.
For example , when selecting the first Demo song in the display
shown below, you can immediately begin playback of the first song by
pressing the LCD button under
1
.