Yamaha Clavinova CVP-405, Руководство по обслуживанию

Страница: 69 / 194

CVP-405/CVP-405PE/CVP-405PM
69
*
If you execute Test No. 64 Factory Set, setting data and user data will be lost. Be sure to save these
data for backup in advance. (But the MAC address will remain.)
TEST PROGRAM
■
1 Measurement conditions
1-1: Measuring instruments
· Level meter (with a JIS-C fi lter)
· Frequency counter
Note: Connect a stereo plug to the [PHONES] jack (L/Rch: 33ohms).
1-2: Jigs
Microphone, Foot pedal, MIDI cable, USB cable (A type-B type), USB fl ash memory, Router (BBR-4MG), etc.
2 How to enter the Test Program
Press the power switch on the keyboard while pressing and holding the [C#2], [F2], and [G#2] (C#2 major code).
2-1: How to proceed the test
1) When the test program is activated, the sign " TEST " is indicated on the LCD display.
2) Go to item choosing mode with [TEMPO -]/[TEMPO +] button or [DATA ENTRY] dial.
3) Press the [START/STOP] button to execute testing.
If the result is successful.
In the acceptable selection screen, an asterisk (*) will be displayed at the head, so that you can see later if it has
already been checked.
If the result is successful, you can return to the selection screen with [START/STOP] button, [DEMO] button or the
Lowest Note.
If the result is unacceptable.
If the result is unacceptable, you can return to the selection screen with [DEMO] button or the Lowest Note.
To return to the last item, press [TEMPO -] button or turn counterclockwise the [DATA ENTRY] dial at the head of items.
[DEMO] button
[START/STOP]
button
[DATA ENTRY]
dial [TEMPO] button
[POWER]
switch
[TAB / ] button