Yamaha CLAVINOVA C L P - 3 8, Руководство пользователя

Страница: 37 / 136

Recording Your Performance
CLP-380 Owner’s Manual
37
Basic Operation
Changing a voice or tempo after recording
You can change the voice and tempo after recording to change a song’s feel or to set a
more suitable tempo. You can also change these elements in the middle of a song.
Procedure
1.
Select a song you wish to change (page 36).
2.
To change the voice or tempo in the middle of the song,
specify the measure to change by using the B [– (NO)] [+
(YES)] buttons while the playback screen is displayed or
by pressing the [PLAY/PAUSE] button to locate a point
slightly prior to the beginning of the part you wish to re-
record.
3.
Change the settings (voice, reverb, etc.).
For example, if you wish to change the recorded E.Piano1 voice to E.Piano2, use
the voice group buttons and the A [–][+] buttons to select E.Piano2.
When the setting is complete, press the [SONG SELECT] button once to return to
the song select screen.
4.
Press and hold down the [REC] button and select the part
to change.
The indicator for the selected part lights up in red.
Change the tempo setting now, if necessary.
At this point, do not play the keyboard or press the [PLAY/PAUSE] button.
Otherwise, recording will start, erasing the recorded data.
5.
Press the [STOP] or [REC] button to exit record mode.
When you exit record mode, the display prompts you whether you want to
overwrite the song or not. Press the B [+ (YES)] button to overwrite the song.
Before changing a voice or tempo,
set the starting method to “Normal”
(page 33).
When the starting method is set to
“FirstKeyOn,” you cannot change a
voice or tempo.
Refer to “What type of data is
recorded?” on page 108 for
information on the settings that can
be changed here.
Change the tempo in Step 4.
The panel settings on Step 3 will be
saved in memory and you will not
be able to restore the previous
settings. Proceed with caution.
TIP
TIP
TIP
CAUTION