Message List
CLP-380 Owner’s Manual
105
Detailed Settings
When you attempted to rename a song and save it in “Rename” (page 43), this message will
appear if an identically-named song already exists. Three seconds after this message is
displayed, you will return to the previous screen. Please specify a different name.
This message prompts you to execute a file-related operation. Press the B [+ (YES)] button
to proceed, or press the [EXIT] button to cancel.
The Clavinova is processing the data internally. Wait until the message disappears, then
proceed to the next step.
This message appears when factory set is completed. The instrument is then restarted.
The normal (factory default) settings (including the memory song setting) (“FactorySet” on
page 102) have been restored. This message also appears if you press and hold down the C7
and turn on the power to the Clavinova (page 102).
The normal (factory default) settings (except for the memory song setting) (“FactorySet” on
page 102) have been restored.
This message will appear when loading of the backup file is completed. The instrument is
then restarted.
There is a problem with the USB [TO HOST] terminal
• When using the CLP-380 connected to your personal computer:
The driver or MIDI application on your computer is not functioning correctly, perhaps
because the computer is turned off, the cable is not connected correctly. In this case, turn
off the power of the CLP-380 and your computer, and check the cable connections. Then
turn on the power in the order of your computer
→
CLP-380, and check that the driver
and MIDI application on your computer are functioning correctly.
• When using the CLP-380 by itself:
This message may appear if a cable is left connected to the USB [TO HOST] terminal of
the CLP-380. In this case, turn off the power of the CLP-380, disconnect the cable, and
then turn on the power again. If the cable is left connected, the CLP-380 may not function
correctly.
This message will appear when the power is turned on after turning off the power while
saving a song or internal settings. The internal memory is being checked while this message
appears. If the internal settings are damaged, they will be reset to the initial settings. If
Memory songs are damaged, they will be deleted.
This message appears when you attempt to create a folder to a USB storage device that
cannot be accessed. Check that the USB storage device is connected to the instrument and
that the [SELECT] switch specifies the appropriate device, then try again.
There is not enough memory space left and you cannot save any more songs. Save songs to
an external device (page 42) or delete some songs in the storage memory, then save new data
to memory.
A USB storage device was not connected to the instrument when you attempted to perform
a drive-related function. Connect the device and continue.
• This message will appear when there is no file to load from the media, even if the file name
is displayed. Securely insert the media.
• This message will appear when two-byte letters are included in the file name.
Message
Meaning
DuplicateName
Execute?-->
Executing
FactorySet Completed
Restart
FactorySet Executing
MemorySongExcluded
FactorySet Executing
MemorySongIncluded
FullBackup Completed
Restart
HostError
LastPowerOffIllegal
MemoryChecking
MakeDir
---:Select USB Drive
MemoryFull
NoDrive
NoFile
Содержание CLAVINOVA C L P - 3 8
Страница 132: ...CLP 380 Owner s Manual 132 Memo ...
Страница 133: ...CLP 380 Owner s Manual 133 Memo ...