manualshive.com logo in svg

Yamaha BRUIN 250, Руководство пользователя, Страница: 72 / 174

Поделиться
Скачать
Yamaha BRUIN 250 Скачать руководство пользователя страница 72

7-9

Pre-operation checks 

Always perform the pre-operation checks list-
ed on page 5-1 before riding for safety and
proper care of the ATV. 

WARNING

POTENTIAL HAZARD 
Failure to inspect the ATV before oper-
ating. 
Failure to properly maintain the ATV. 
WHAT CAN HAPPEN 
Increases the possibility of an accident
or equipment damage. 
HOW TO AVOID THE HAZARD 
Always inspect your ATV each time you
use it to make sure the ATV is in safe op-
erating condition. 
Always follow the inspection and main-
tenance procedures and schedules de-
scribed in the Owner’s Manual.

WARNING

POTENTIAL HAZARD 
Operating this ATV with improper tires,
or with improper or uneven tire pres-
sure. 
WHAT CAN HAPPEN 
Use of improper tires on this ATV, or op-
eration of this ATV with improper or un-
even tire pressure, may cause loss of
control, increasing your risk of an acci-
dent. 
HOW TO AVOID THE HAZARD 
Always use the size and type tires spec-
ified in the Owner’s Manual for this vehi-
cle on pages 5-9–5-10. 
Always maintain proper tire pressure as
described in the Owner’s Manual on
page 5-11.

EE.book  Page 9  Wednesday, June 23, 2004  1:13 PM

Содержание BRUIN 250















































































































































































Отзывы:

Нет отзывов