manualshive.com logo in svg

Yamaha BRUIN 250, Руководство пользователя, Страница: 157 / 174

Поделиться
Скачать
Yamaha BRUIN 250 Скачать руководство пользователя страница 157

9-3

EBU00530

B. STORAGE

Long term storage (60 days or more) of your
machine will require some preventive proce-
dures to guard against deterioration. After
thoroughly cleaning the machine, prepare for
storage as follows:

1. Fill the fuel tank with fresh fuel and add

the specified amount of Yamaha Fuel
Stabilizer and Conditioner or an equiva-
lent product.

NOTE:

_ 

Use of fuel stabilizer and conditioner elimi-
nates the need to drain the fuel system. Con-
sult a Yamaha dealer if the fuel system needs
to be drained instead. 

_

2. Remove the spark plug, pour about one

tablespoon of SAE 10W30 or 20W40
motor oil in the spark plug hole and rein-
stall the spark plug. Ground the spark
plug wire and turn the engine over seve-
ral times to coat the cylinder wall with oil.

3. Lubricate all control cables.
4. Block up the frame to raise all wheels off

the ground.

5. Tie a plastic bag over the exhaust pipe

outlet to prevent moisture from entering.

6. If storing in a humid or salt-air atmo-

sphere, coat all exposed metal surfaces
with a light film of oil. Do not apply oil to
any rubber parts or the seat cover.

Specified amount:

1 oz of stabilizer to each gallon of fuel 
(or 7.5 cc of stabilizer to each liter of fuel)

EE.book  Page 3  Wednesday, June 23, 2004  1:13 PM

Содержание BRUIN 250















































































































































































Отзывы:

Нет отзывов