manualshive.com logo in svg

Yamaha BRUIN 250, Руководство пользователя, Страница: 18 / 174

Поделиться
Скачать
Yamaha BRUIN 250 Скачать руководство пользователя страница 18

2-5

WARNING

POTENTIAL HAZARD 
Improper handling of gasoline. 
WHAT CAN HAPPEN 
Gasoline can catch fire and you could
be burned. 
HOW TO AVOID THE HAZARD 
Always turn off the engine when refuel-
ing. 
Do not refuel immediately after the en-
gine has been running and is still very
hot. 
Do not spill gasoline on the engine or
exhaust pipe/muffler when refueling.
Never refuel while smoking, or in the vi-
cinity of sparks, open flames, or other
sources of ignition such as the pilot
lights of water heaters and clothes dry-
ers. 

When transporting the ATV in another
vehicle, be sure it is kept upright and
that the fuel cock is in the “OFF” posi-
tion. Otherwise, fuel may leak out of the
carburetor or fuel tank. 
WHAT CAN HAPPEN 
Gasoline is poisonous and can cause
injuries. 
HOW TO AVOID THE HAZARD 
If you should swallow some gasoline or
inhale a lot of gasoline vapor, or get
some gasoline in your eyes, see your
doctor immediately. 
If gasoline spills on your skin, wash with
soap and water. If gasoline spills on
your clothing, change your clothes.

EE.book  Page 5  Wednesday, June 23, 2004  1:13 PM

Содержание BRUIN 250















































































































































































Отзывы:

Нет отзывов