manualshive.com logo in svg

Yamaha BRUIN 250, Руководство пользователя, Страница: 144 / 174

Поделиться
Скачать
Yamaha BRUIN 250 Скачать руководство пользователя страница 144

8-41

WARNING

POTENTIAL HAZARD

Failure to handle batteries or battery
electrolyte carefully.

WHAT CAN HAPPEN

You could be poisoned. You could be
severely burned by the sulfuric acid in
battery electrolyte.
Batteries produce explosive gases.

HOW TO AVOID THE HAZARD

Avoid contact with skin, eyes or cloth-
ing. Always shield eyes when working
near batteries. Keep out of reach of chil-
dren.
Antidote:
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of wa-
ter or milk. Follow with milk of magne-
sia, beaten egg or vegetable oil. Get
prompt medical attention.

EYES: Flush with water for 15 minutes
and get prompt medical attention. Keep
batteries away from sparks, flames, cig-
arettes or other sources of ignition. Ven-
tilate when charging or using in a closed
space.

EE.book  Page 41  Wednesday, June 23, 2004  1:13 PM

Содержание BRUIN 250















































































































































































Отзывы:

Нет отзывов