Yamaha AW4416 Скачать руководство пользователя страница 196

Страница: 196 / 507

Chapter11—Song management

— Operation Guide

181

❒

Copying a song

1. Press the [SONG] key

→

[F3] key to access the SONG screen Song Edit

page.

2. Move the cursor to the list in the upper part of the display. Use the

[DATA/JOG] dial to select the song that you wish to copy, and press the
[ENTER] key.

An “E” symbol will appear in the left edge of the list, indicating that the corre-
sponding song is selected for the Copy operation.

Tip!

You may select multiple songs (including the current song) for copying.

3. Move the cursor to the COPY button, and press the [ENTER] key.

A popup window will ask you to confirm the Copy operation.

Tip!

• If you decide to cancel the Copy operation, move the cursor to the CANCEL

button and press the [ENTER] key.

• After the Copy operation is executed, the hard disk will contain two songs with

identical song name, date, and size. To avoid confusion, we recommend that
you change the song name immediately.

4. To execute the Copy operation, move the cursor to the OK button and

press the [ENTER] key.

The current song will be saved automatically, and then the Copy operation will
be executed.

Содержание AW4416




























































































































































































































































































































































































































































































































Результаты поиска

Содержание AW4416

Отзывы:

Похожие инструкции для AW4416

Бренды по названию

Популярные бренды

Yamaha AW4416, Руководство по эксплуатации

Результаты поиска

Содержание AW4416

Отзывы:

Похожие инструкции для AW4416

Бренды по названию

Популярные бренды