AW2816
62
TEST PROGRAM
1. Getting Ready
1-1 Rear Panel
(1) Insert the slot check card (TX800810) into an optional
I/O slot.
(2) Connect an external hard disk drive unit to the SCSI
connector (50-pin half-pitch connector).
*1 The capacity of the external hard disk drive must
be at least 4GB, and the disk must already be
physically formatted.
*2 The SCSI cable length should not exceed 300mm.
*3 Be sure that the external hard disk drive is
terminated. (Plug a terminator into the drive’s free
SCSI connector.)
*4 Set the SCSI address of the external hard disk
drive to 0.
(3) Using a dedicated cable, connect the 8-pin MiniDIN
connector on the slot check card to the TO HOST
connector (8-pin MiniDIN connector) on the
instrument.
(4) Using a pin-jack cable, connect the DIGITAL STEREO
IN connector to the DIGITAL STEREO OUT
connector.
(5) Using a MIDI cable, connect the MIDI IN connector
to the MIDI OUT/THRU connector.
(6) Connect a footswitch (FC5 or equivalent) to the FOOT
SW jack.
1-2 MAIN Sheet
(1) Connect the 2.5-inch HDD for TEST to the CN703
connector on the MAIN sheet.
2. Starting the Test Program (Diagnostics Program)
2-1 Locations of Program Startup and Selection Keys
HOME
1-8
1-8
9-16
SOLO
CANCEL
UTILITY
(INPUT)
(RECORDER)
CURSOR
POWER ON
ENTER
2-2 Starting the Program and Displaying the Test Menu
(1) Startup
1) Hold down the
UTILITY
and
HOME
keys, and turn on
the power.
=== TOTAL DIAGNOSTICS
BATTERY OK
===
01. SWITCH
02. LED
03. LCD
04. DPRAM
05. DSP6
06. DSP7
07. ENCODER
08. JOG/SHUTTLE
09. IDE
10. SCSI
11. SLOT
12. TO HOST
13. MIDI
14. CD-RW(ATAPI)
15. W. CLOCK
16. DIGITAL I/O
17. FADER
18. MUTE
19. SDRAM
20. REAL TIME CLOCK
21.
22.
23.
24.
25.
26.
27.
28.
29.
30. FADER AGING
Indicates that the test item is not available.
OK
Cursor (blinking)
3. Test Items
3-1 List of Test Items
3-2 Selecting and Executing a Test
(1) Use the
or
key to move the cursor to
the test you wish to run.
(2) Press the
ENTER
key to run the test.
3-3 Test Result
(1) The test result is displayed to the left of the test item
in the menu (see section 3-5, “Displaying the Test
Results”). If the test completes successfully,
will
be displayed. If the test fails or is canceled,
NG
will
be displayed.
SWITCH
LED
LCD
DPRAM
DSP6
DSP7
ENCODER
JOG/SHUTTLE
IDE
SCSI
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
19
20
30
No.
No.
SLOT
TO HOST
MIDI
W.CLOCK I/O
DIGITAL I/O
FADER
SDRAM
REAL TIME CLOCK
FADER AGING
Test
Test
2) When the following title screen appears on the LCD,
release the keys.
3) The program starts up and the test menu appears
on the LCD.
(2) Test Menu
AW2816
Copy right © 2001 YAMAHA
Mixer CPU Version : V .
Create date : 2001/ / : :
Sub CPU Version : V .
Содержание AW2816
