Yamaha AVENTAGE RX-A880 Скачать руководство пользователя

Страница: 167 / 203

No sound is produced, or the sound is interrupted
during playback with Bluetooth® connection

The volume of the Bluetooth device is set too low.

Turn up the volume of the Bluetooth device.

The Bluetooth device is not set to send audio signals to the unit.

Switch the audio output of the Bluetooth device to the unit.

The Bluetooth connection has been terminated.

Establish a Bluetooth connection between the Bluetooth device and the unit again.

For details, see the following:

– “Playback Bluetooth

device music on the unit” (p.81)

The unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to the unit.

There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.

Move the unit and the Bluetooth device away from those devices.

167

Содержание AVENTAGE RX-A880












































































































































































































Результаты поиска

Содержание AVENTAGE RX-A880

Отзывы:

Похожие инструкции для AVENTAGE RX-A880

Бренды по названию

Популярные бренды

Yamaha AVENTAGE RX-A880, Руководство пользователя

Результаты поиска

Содержание AVENTAGE RX-A880

Отзывы:

Похожие инструкции для AVENTAGE RX-A880

Бренды по названию

Популярные бренды