Yamaha AVENTAGE RX-A880 Скачать руководство пользователя

Страница: 154 / 203

Setting DTS Format Notification (DTS MODE)

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A-DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B

2 A

VOL.

FPR

SBL SB SBR

FPL

MUTE VIRTUAL

DTS MODE•MODE1

This setting informs the BD player about the DTS formats that the unit supports.

ADVANCED SETUP menu

“DTS MODE”

Settings

MODE 1

This mode conforms to the DTS:X standard.
Use this setting under normal circumstances.

MODE 2

Use this setting if the BD player fails to properly output a DTS signal even
when it is playing back DTS-HD or DTS:X content.

Backuping and restoring all the settings (BKUP/RSTR)

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A - DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B

2 A

VOL.

FPR

SBL

SBR

FPL

MUTE VIRTUAL

BKUP/RSTR•BKUP

Backups and restores all the unit's setting to a USB memory device. Prepare a USB
memory device using FAT16 or FAT32 format in advance.

ADVANCED SETUP menu

“BKUP/RSTR”

Settings

BKUP

Backups all the settings.

RSTR

Restores all the previous backuped settings.

Connect the USB memory device to the USB jack on the front
panel.

To start the process, press STRAIGHT to select “BKUP” or
“RSTR” and then press INFO on the front panel.

Press INFO again after the confirmation message appears on the
front display.

When “Complete” appears on the front display, press

(power)

to set the unit to standby mode and turn it on again.

If “Failed” appears on the front display, check the following and start the

process again.

In case of “BKUP”:

• You cannot overwrite save. When you save the settings repeatedly, please move the

file in different folder.

• The file is stored by the name of “MC_backup_(model name).dat” in the route of the

USB memory device.

In case of “RSTR”:

• Check that the file is stored in the route of the USB memory device.

NOTE

▪ “RSTR” is effective after backuping all the settings.
▪ Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be

restored correctly.

▪ The user information (such as account, password) is not saved.

154

Содержание AVENTAGE RX-A880












































































































































































































Результаты поиска

Содержание AVENTAGE RX-A880

Отзывы:

Похожие инструкции для AVENTAGE RX-A880

Бренды по названию

Популярные бренды

Yamaha AVENTAGE RX-A880, Руководство пользователя

Результаты поиска

Содержание AVENTAGE RX-A880

Отзывы:

Похожие инструкции для AVENTAGE RX-A880

Бренды по названию

Популярные бренды