Adjusting the delay of the Lipsync function
Adjusts the delay between video and audio output manually when “Select” is set to
“Manual”. You can fine-adjust the audio output timing when “Select” is set to “Auto”.
Setup menu
“Sound” > “Lipsync” > “Adjustment”
Setting range
0 ms to 500 ms (1 ms increments)
NOTE
For details on “Select” in the “Setup” menu, see the following:
▪ “Setting the adjustment method of the Lipsync function” (p.103)
Adjusting the volume of dialogue sound
Adjusts the volume of dialogue sounds that are hardly heard.
Setup menu
“Sound” > “Dialogue” > “Dialogue Level”
Setting range
0 to 3 (higher to strengthen)
NOTE
This setting is not available when one of the following conditions is met.
▪ Dolby Atmos content or DTS:X content is played back.
▪ The Dolby Surround or Neural:X decoder is working.
Adjusting the volume of dialogue sound during
DTS:X™ playback
Adjusts the volume of dialogue sounds that are hardly heard for DTS:X content.
Setup menu
“Sound” > “Dialogue” > “DTS Dialogue Control”
Setting range
0 to 6 (higher to strengthen)
NOTE
This setting is available only when DTS:X content which supports the DTS Dialogue Control feature is played
back.
En
104