background image

1

2

4

8

3

5

6

7

EAS00007

HOW TO USE THIS MANUAL

This manual is intended as a handy, easy-to-read reference book for the mechanic. Comprehensive
explanations of all installation, removal, disassembly, assembly, repair and check procedures are laid
out with the individual steps in sequential order.

1

 The manual is divided into chapters. An abbreviation and symbol in the upper right corner of each

page indicate the current chapter.
Refer to “SYMBOLS”.

2

 Each chapter is divided into sections. The current section title is shown at the top of each page,

except in Chapter 3 (“PERIODIC CHECKS AND ADJUSTMENTS”), where the sub-section title(s) ap-
pears.

3

 Sub-section titles appear in smaller print than the section title.

4

 To help identify parts and clarify procedure steps, there are exploded diagrams at the start of each

removal and disassembly section.

5

 Numbers are given in the order of the jobs in the exploded diagram. A circled number indicates a

disassembly step.

6

 Symbols indicate parts to be lubricated or replaced.

Refer to “SYMBOLS”.

7

 A job instruction chart accompanies the exploded diagram, providing the order of jobs, names of

parts, notes in jobs, etc.

8

 Jobs requiring more information (such as special tools and technical data) are described sequen-

tially.

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys

email: [email protected]

Содержание 2004 Moto Matrix










































Отзывы: