–12–
AK Insert until it sets.
AL The clamp by the side of a hose comes below an
attachment clamp.
CABLE ROUTING
SPEC
AD Clamp the wire harness, main switch lead branch
section, radiator fan motor lead and immobilizer
unit lead. Align the taping position of the immobi-
lizer unit lead.
AE Branching harness from the wire harness.
AF Use the plastic locking tie to clamp the starter mo-
tor lead at the protector section.
AG Tip of the plastic locking tie should point to the
downward outside of the vehicle.
AH Sealing set of the cover can be either upper or
lower against the frame lower end. However, it
should not be caught.
AI Make sure not to drop the headlight sub wire har-
ness beneath the projection of the duct. Check it
when installing the side cowling.
AJ Point the tip of the plastic locking tie to the rear
side of the vehicle.
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: [email protected]
