–3–
CABLE ROUTING
SPEC
A Pass the right handlebar switch lead inside the front
brake hoses and over the throttle cables.
B Install the throttle cables to the hook so that the pull-
ing side of the throttle cables is routed downward.
C Pass the clutch cable through the guide.
D Plastic locking tie shall be positioned at 10 mm
(0.39 in.) below from the upper bracket.
E Clamp the left handlebar switch lead to the front fork
with the plastic locking tie and cut the tip of the tie.
Clamp it to the protector section.
1
Right handlebar switch lead
2
Clutch cable
3
Immobilizer unit lead, main switch lead and left han-
dlebar switch lead
4
Throttle cable (return side)
5
Throttle cable (pull side)
6
Front brake hoses
7
Throttle cables
8
Joint
9
Under bracket
CABLE ROUTING
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: [email protected]
