12
13
Flasher relay coupler
14
Oil lamp relay coupler
15
Igniter unit coupler
A Pass the wire harness and the
starter cable through the holder
wire of the gusset.
Pass the starter cable under the
wire harness.
B Secure the lead wire branch of
the main harness to tension pipe
1, at the immediate rear of the
gusset, by use of this band.
The front end of the band must
be directed downward.
C Bundle the four high-tension
cords, the #1 and #2 cords up
and the #3 and #4 cords down,
by use of this band.
Position the leading ends of the
cords near, but not below, the
lower front end of the air induc-
tion system assy.
1
Gusset
2
Tension pipe 1
3
#2 high-tension cord
4
#1 high-tension cord
5
Wire starter
6
A.C. generator
7
Oil filter cover
8
Side stand switch
9
Side stand switch lead wire
10
Horn lead wire
11
#2 and #3 ignition coil lead wires
12
Frame ground lead wire
SPEC
CABLE ROUTING
