Yamaha 1009MWTO-F0 Скачать руководство пользователя | Manualshive

Страница: 18 / 80

background image

Set

up

Setup Procedure

DME64N/DME24N Owner’s Manual

18

Setup Procedure

Follow the steps outlined below to prepare the DME64N/24N for operation.

1.

Install any required I/O cards.

Refer to “I/O Card Installation” on page 20 for details.

2.

Connect the AC power cord.

Be sure to turn all devices OFF before connecting AC mains power.
Attach the cable clamp to prevent accidental disconnection.

Attaching the cable clamp.

Be sure to properly ground the device to prevent possible electrical shock.

First plug the female-connector end of the AC cord into the [AC IN] socket on the rear panel of the
DME64N/24N, then plug the male plug into an appropriate AC mains outlet. Make sure the AC power to be
used complies with the conditions marked on the top cover of the device.

Use only the AC power cord supplied with the DME64N/24N. If the supplied cord is lost or damaged
and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement
can pose a fire and shock hazard!
The type of AC power cord provided with the DME64N/24N may be different depending on the
country in which it is purchased (a third prong may be provided for grounding purposes). Improper
connection of the grounding conductor can create the risk of electrical shock. Do NOT modify the
plug provided with the DME64N/24N. If the plug will not fit the outlet, have a proper outlet installed
by a qualified electrician. Do not use a plug adapter which defeats the grounding conductor.

3.

Install the DME Designer software and necessary drivers on the computer to be used for
device group control.

See the “DME Setup Manual” (PDF file) for details.

Setup

Security Cover Mounting

Security cover mounting screw holes (M3 size) are provided on the front panel of the unit. The spacings are 423mm
width and 96mm (DME64N) / 52mm (DME24N) height. See “Dimensions” on page 65 for details. A security cover
made by the customer or contractor can be attached to the front panel via these mounting holes to prevent
accidental operation. Yamaha cannot supply a security cover.

When mounting a cover make sure that the screws used do not go deeper than 15 millimeters into the front panel.
Also, to ensure that the cover does not come in contact with the panel controls, leave a space of about 20 millimeters
between the front panel and the cover.

CAUTION

CAUTION

«
...
16
17
18
19
20
...
»

Содержание 1009MWTO-F0

















































































Отзывы:

Нет отзывов

Похожие инструкции для 1009MWTO-F0

Бренд: Hamilton Beach Страницы: 5

Бренд: Hamilton Beach Страницы: 20

Бренд: Hamilton Beach Страницы: 8

Бренд: Salton elite Страницы: 8

DANALOG DDX3216

Бренд: Behringer Страницы: 22

Бренд: Bake Max Страницы: 10

Бренд: Tascam Страницы: 28

Бренд: American Audio Страницы: 26

Бренд: AKG Страницы: 70

Бренд: Boss Страницы: 4

Бренд: Harris Страницы: 44

Бренд: Mackie Страницы: 36

Бренд: H.Koenig Страницы: 56

Exodus Alpha MXR 1800

Бренд: Gecko Страницы: 26

Бренд: Team Kalorik Страницы: 36

Бренд: Yamaha Страницы: 12

Бренд: Yamaha Страницы: 12

Бренд: Yamaha Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды