82
Recording/Playback/Remote Control
01X Owner’s Manual
Before Using
Basics Section
Appendix
Getting Started
Reference
Other control features
Using the Function buttons
The eight Function buttons [F1] - [F8] provide a powerful
and versatile way to customize DAW control and stream-
line your recording, editing and mixing work. Just as with
the Key Commands, these buttons can be assigned to any
desired function, operation or command. Used in conjunc-
tion with the [SHIFT] button, you can program up to thir-
teen different key commands for instant, one-touch control
from the 01X. What’s more, the two FOOT SWITCH
jacks can also be assigned, letting you control two separate
functions with connected footswitches.
●
Assigning the Function buttons
1
From the Devices menu, select “Device Setup...”
2
Select “Mackie Control” from the list.
3
In the chart next to the button you wish to assign,
click the Category cell. From the pop-up menu,
select the desired Category.
For details on the available Categories and Com-
mands, refer to the Cubase SX documentation.
4
Next, click the Command cell for the button, and
select the desired Command from the pop-up menu.
5
Repeat steps
3
and
4
above to program the other
Function buttons and their [SHIFT] combinations.
Also, program the footswitches if desired (User A and
B correspond to FOOT SWITCH jacks A and B,
respectively.)
• The [SHIFT] combinations with [F1], [F2] and [F4] are
reserved for other functions (TRACK, MIXER and CLOSE),
and cannot be programmed.
6
Click [Apply] to enter the settings, then click [OK].
