Yamaha 01x Скачать руководство пользователя

Страница: 34 / 156

Application examples

01X Owner’s Manual

Before Using

Basics Section

Appendix

Getting Started

Reference

Application examples

The 01X is one of the most versatile recording mixers available. Its all-in-one, fully digital operation makes it ideal for song-

writers, producers, project studios, home recording, and virtually all post-production applications. Here are some of the ways

you can set up and use the 01X in your own system.

1) Recording mixer and monitor mixer

In this application example, vocals and instruments can be

recorded to computer while monitoring playback of MIDI

tone generators with the 01X.

Here, the sequencer data drives the MIDI instruments

which come in stereo via two input channels and are pro-

cessed with Dynamics, EQ and effects as needed. The sig-

nal is then routed to the MONITOR OUT bus for

monitoring. Vocals, guitar and keyboard are input to the

other channels and are sent (after Dynamics and EQ pro-

cessing) directly to the computer.

This setup lets you record instruments in real time to exist-

ing sequence data, while hearing the previously recorded

MIDI tracks. Any audio tracks and plug-in synthesizers,

etc. can also be monitored.

Remote control features

Control your computer’s audio/MIDI sequencer from the

01X while tracking, alternately switching between

INTERNAL and REMOTE as needed. The 01X also gives

you control over the audio mixer in the sequencer (includ-

ing the plug-in instruments), as well as detailed parameter

control over the plug-in effects.

Recording mixer features

Naturally, the 01X gives you simultaneous eight-channel

input with full mixing control—level adjustment, Dynam-

ics, and four-band EQ. Using the Channel Module soft-

ware on your computer gives you onscreen display and

control of level, Dynamics, and the four-band EQ.

This application also takes advantage of the flexible rout-

ing options, letting you set up a separate stereo bus and

recording bus. Moreover, the individual vocals and instru-

ments are recorded directly to computer as 24-bit digital

audio data—at up to 96kHz sampling rate, if desired.

* When the 01X is set to 88.2kHz/96kHz operation, mLAN trans-

mission (from the computer) is limited to eight channels and only
one internal effect block can be used.

Monitor mixer features

Another huge benefit of this setup is that the mixer inputs

recorded to the computer can be monitored directly from

the 01X—complete with all Dynamics, EQ and effect pro-

cessing. You can also monitor the audio tracks on the com-

puter with 01X effect processing as well, via the input

channels or the DIGITAL IN terminal.

01X

Computer

HDR (Wave)

Synth

• Soft EQ
• Soft Effect

Synth/TG

Mic

Synth

Effect

Monitor Out

Audio Mixer

EQ, Dynamics

Содержание 01x





























































































































































Результаты поиска

Содержание 01x

Отзывы:

Похожие инструкции для 01x

Бренды по названию

Популярные бренды

Yamaha 01x, Руководство пользователя

Результаты поиска

Содержание 01x

Отзывы:

Похожие инструкции для 01x

Бренды по названию

Популярные бренды