01X Owner’s Manual
Recording/Playback/Remote Control
67
Before Using
Basics Section
Appendix
Getting Started
Reference
e
Select “Mackie Control” (or “Yamaha 01X”) from the
list and click Add.
r
Select “Mackie Control” from the “Devices” list, then
click on the setup tab.
t
Set the MIDI Input and Output ports.
Select the unnumbered mLAN MIDI port; this corre-
sponds to Port 1 for the remote control functions.
y
Click OK to finish.
• For details on which mLAN MIDI port numbers are available for
the 01X, see page 95.
• MIDI and audio setup
Since mLAN serves not only as a control surface for
Cubase SX but also as a MIDI and audio interface, you’ll
need to make the appropriate MIDI and audio settings in
Cubase SX.
MIDI setup
q
From the Devices menu, select “Device Setup...”
w
Select “Default MIDI Ports” from the list.
e
Click on the Setup tab (if necessary).
r
Set the MIDI Input and Output ports.
Click on the arrow to call up the pop-up menu. If you
wish to use the 01X as a MIDI interface as well, using
the separate MIDI A or B terminal on the rear panel, set
these to mLAN MIDI Port 2 or 3. You can also select a
USB MIDI port here, depending on your computer and
the particular USB device you are using.
• For details on which mLAN MIDI port numbers are available for
the 01X, see page 95.
