background image

!

Warning:

Changes or modifications to this device, not expressly approved by Yale Security

Inc. could void the user's authority to operate the equipment.

FCC:

Contain

: U4A-

0

FCC ID

YRHCPZW  FM

Model:

2-

YRMZW US

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the

Rules. These limits are designed to provide

FCC

reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
Interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

Ÿ

Reorient or relocate the receiving antenna.

Ÿ

Increase the separation between the equipment and

receiver.

Ÿ

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Ÿ

Consult the dealer or an experienced radio/TV

technician for help.

THIS DEVICE COMPLIES WITH PART      OF THE FCC RULES

15

.

OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE AND

THIS DEVICE MUST ACCEPT ANY

,

(2)

INTERFERENCE RECEIVED INCLUDING INTERFERENCE

,

THAT MAY CAUSE UNDESIRED OPERATION.

Industry Canada:
Contain

: 6982A-

0

IC

YRHCPZW  FM

Model:

2-

YRMZW US

Section 7.1.2 of

-

RSS GEN

Under Industry Canada

regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type

and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
En vertu des règlements d'Industrie Canada, cet émetteur
radio ne peut fonctionner avec une antenne d'un type et un
maximum (ou moins) approuvés pour gagner de l'émetteur
par Industrie Canada. Pour réduire le risque d'interférence
aux autres utilisateurs, le type d'antenne et son gain
doivent être choisies de façon que la puissance isotrope
rayonnée équivalente (

) ne dépasse pas ce qui est

PIRE

nécessaire pour une communication réussie.

Section 7.1.3 of

-

RSS GEN

This Device complies with

Industry Canada License-exempt

standard(s).

RSS

Operation is subject to the following two conditions: 1) this
device may not cause interference, and 2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS
standard exemptes de licence(s). Son fonctionnement est
soumis aux deux conditions suivantes: 1) ce dispositif ne
peut causer des interférences, et 2) cet appareil doit
accepter toute interférence, y compris les interférences qui
peuvent causer un mauvais fonctionnement du dispositif.

This radio transmitter 6982A-

0

has been

YRHCPZW  FM

approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device.

Le présent émetteur radio 6982A-

0

a été

YRHCPZW  FM

approuvé par Industrie Canada pour fonctionner avec les
types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal. Les types d'antenne non inclus dans
cette liste, et dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.

CAN ICES

NMB

-3B/

-3B

Product Support Tel 1-855-213-5841 • www.yalehome.com

Yale® and Yale Real Living® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company.

Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for

reference purposes only. Copyright © 2017, Yale Security Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.

YALE,

with its unique global reach and range of products, is the world's favorite lock

– the preferred solution for securing your home, family and personal belongings.

ASSA ABLOY

is the global leader in door opening solutions,

dedicated to satisfying end-user needs for security, safety and convenience.

Содержание YRC216











































Отзывы: