17
+
PIN CODE
Panic button
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
>3sec.<
Reset Key Pad Code
Reset to factory default (0000) using the following steps:
5.
Initiliase your Key Pad. See previous page 16.
6.
Learn in your system.
Using your Key Pad
• Deactivate a panic event by pressing the disarm button
followed by your PIN code.
If there is a system fault, you will need to press the Arm/
Home Arm button for a second time to “force arm” the
system.
Smoke Detector
Smoke Detection
When smoke is detected the device will
activate for a minimum of 10 seconds
with a two tone alarm and flashing LED.
Pressing the test button when in an
alarm condition will silence the alarm for
10 minutes. It will automatically resume
smoke detection again after this period.
Testing
Smoke Detector testing should be done on a regular
monthly basis. Pressing the test button will make the LED
flash, the audible sounder chime and will send a test signal
to the Smart Hub when the button is released. If nothing
happens after pressing the test button, it indicates the
batteries will need changing (see page 16).
Recalibration
The Smoke Detector might need recalibrating after time
to ensure it is working at its optimum. This is done by
pressing and holding the test button until the LED flashes
and beeps after 10 seconds. The Detector will then start its
self calibration routine.
Panic Button
Activate an Alarm
Press and hold the red button for at least 3
seconds to activate a panic alarm.
Silence an Alarm
Press and hold down the red button for 10 seconds.
Silencing the alarm with the Panic Button does not reset
the system. If the alarm is armed prior to activation, the
system will re-arm after being silenced with the Panic
Button.
Resetting the system after a Panic Alarm
The system will require a reset at the Smart Hub after being
silenced with the Panic Button. To reset the Smart Hub
unplug the AC power (a) and turn the battery switch off for
10 seconds. Turn the battery switched back on and plug in
the AC power again.
Adding and Using Accessories
(cont.)
7
+
PIN CODE
Panic button
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
>3sec.<
1
1
1
2
3
(15)
(GB) Installation - (IT) Installazione - (DE) Installation - (NO) Installasjon - (SE) Installation -
(DK) Installation.
Pair / Test button
Pair / Test button
(IT) Associazione/test - (DE) Verbinden/Testen -
(NO) Tilkobling/Test - (SE) Para/Testa - (DK) Tilslut/test
(IT) Associazione/test - (DE) Verbinden/Testen -
(NO) Tilkobling/Test - (SE) Para/Testa - (DK) Tilslut/test
Ø 5mm
7
1
1
1
2
3
(15)
(GB) Installation - (IT) Installazione - (DE) Installation - (NO) Installasjon - (SE) Installation -
(DK) Installation.
Pair / Test button
Pair / Test button
(IT) Associazione/test - (DE) Verbinden/Testen -
(NO) Tilkobling/Test - (SE) Para/Testa - (DK) Tilslut/test
(IT) Associazione/test - (DE) Verbinden/Testen -
(NO) Tilkobling/Test - (SE) Para/Testa - (DK) Tilslut/test
Ø 5mm
7
1
2
4
(09)
(GB) Setting up - (IT) Configurazione - (DE) Einstellung -
(NO) Tilkobling og montering av alarmsentralen - (SE) Driftsättning -
(DK) Opsætning.
3
a
b
4
Router
NOT INCLUDED
Lear
n
Pow
er
LAN
Batt
ery
<On O
ff>
Batt
ery
<On O
ff>
<On Off>
Lear
n
Pow
er
LAN
Batt
ery
<On O
ff>
OR
a
b
c
Ø5mm
Lear
n
Pow
er
LAN
Batt
ery
<On O
ff>
a
b
(a)
(GB) How does it work - (IT) Come funziona - (DE) Wie es funktioniert -
(NO) Hvordan virker det - (SE) Hur fungerar det - (DK) Hvordan virker det
(GB) Tamper alarm - (IT) Allarme effrazione - (DE) Sabotagealarm - (NO) Sabotasjesalarm -
(SE) Manipulationslarmet - (DK) Destruktions-alarm
(05)
>3sec.<
SR-PB
Radio 868MHz
SR-KF
Radio 868MHz
Radio 868MHz
SR-EIR
~12m
2.3m
1
110°
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
1.
Unscrew
2.
Remove
3.
Hold down number 3 at the same time as inserting
the new battery.
4.
Replace cover
Disarmed
Part Armed
Armed
(GB) How does it work - (IT) Come funziona - (DE) Wie es funktioniert -
(NO) Hvordan virker det - (SE) Hur fungerar det - (DK) Hvordan virker det
(GB) Tamper alarm - (IT) Allarme effrazione - (DE) Sabotagealarm - (NO) Sabotasjesalarm -
(SE) Manipulationslarmet - (DK) Destruktions-alarm
(05)
>3sec.<
SR-PB
Radio 868MHz
SR-KF
Radio 868MHz
Radio 868MHz
SR-EIR
~12m
2.3m
1
110°
10 secs
