Yale ERC40VH, Руководство пользователя

Страница: 74 / 105

Figure 29. Calibration Title Screen
Press the Enter Key ( * ) to enter the Calibration Menu and the system will display the first submenu in the
Calibration Menu, the Load Weight Display submenu, which is shown in Figure 30 . Press the Enter Key
again if you want to enter this submenu. If you want a different submenu, use the Scroll Back Key or Scroll
Forward Key to move to another submenu and press the Enter Key .
Figure 30. Load Weight Display Submenu
The Calibration Menu presents these submenus:
• Load Weight Display
• Return to Set Tilt Stop Point
• E-Hydraulic Valves
• Steering Wheel Center Point
• Steer Axle Position
• Steer Axle Center Point
• Manual Hydraulics
The following sections describe the Calibration submenus.
LOAD WEIGHT CALIBRATION
NOTE:
This measurement is not for trade.
This menu item, shown in Figure 30 , allows a Service Technician, Supervisor, or Operator to calibrate Load
Weight. To calibrate Load Weight, select this submenu from the Calibration Menu and follow the prompts on
the display.
NOTE:
When the user is logged in under an operator level password or default password, only the
tare weight default zero point calibration is available.
To calibrate the Load Weight Display:
1 Starting from the Calibration Menu, scroll to the Load Weight Display screen and press the
Enter Key .
2 When prompted, position the empty forks at the load weight height, which is site dependent.
3 Press the
Enter Key .