28-13-011-Rev4
4/17
3
4
1
2
BREAK ROOF TRIM
Using your thumb to support trim at drilled holes, bend the cut trim sections
back and forth to break at drilled holes. Some force may be required to snap
the stainless steel section in trim.
Neaten edges where trim has broken as much as possible.
Remove all Tape from vehicle roof.
7
REVEAL MOUNTING POINTS
With the trim pieces removed, the M8 mounting points can now
be accessed. The mounting points are covered with paint and
tape. Use a sharp tool to remove paint and peel away tape covering
holes to reveal screw thread. If the roof panel overlaps the hole
and impedes on accessing the thread, carefully file the roof panel
to allow clearance for inserting the M8 Button Head Screws.
8
NOTE - Isuzu D-Max SX Models do not feature a
third (#3) mounting point. Proceed to Page 10
for supplement D-Max SX fitting instructions.
File overlapping panel if shape of hole won’t
allow clearance for inserting the
M8 Button Head Screws.
