Instruction #1036039A - page 4 of 10
E
F
C
D
B
A
A. Remove the lock (or bridge pin).
B. Remove the pin.
C. Remove the knob.
D. Store the knob in the upper hole.
E. Rotate the EXO TopShelf to the 180° position.
F. Insert the lock pin, reattach the lock or bridge
pin, and reinstall the knob.
2
ROTATE THE EXO TOPSHELF™.
NOTE:
Ensure that
you have rotated
the EXO TopShelf™
back to it’s original
position before
closing the EXO
SwingBase.
3
CLOSE THE EXO SWINGBASE™.
A. Pull the pin at the
pivot point.
B. Swing the gate by
the handle toward
the vehicle.
C. Use the handle
to guide the EXO
SwingBase up the
ramp, and into the
closed position.
D. Tighten the large
knob to 25 Nm.
C
D
B
A
25 Nm
NOTE:
The EXO TopShelf
may be rotated with any
EXO accessory installed.
