Yakar 301, Руководство по эксплуатации

Страница: 8 / 14

Figure -3
CONNECTION DIAGRAM OF
ELECTRICL CABLE TO CIRCULATION PUMP
Figure -4
3 - OPERATING CENTRAL HEATING STOVE
3.1 When installation becomes completed, you must open the valve in order to give water to boiler's return
line (Figure -
2/9) from service water
line.
3.2 Valve must be closed when 1/4 of expansion tank is filled.
3.3 Empty cable ends must be connected to circulation pump (Figure
-
2/3) as seen in (Figure
-
3)
3.4 Plug must be inserted to grounded socket. One of the lamps (from two lamps
-
Figure
-
3/10) show
that there is electricity and the other one indicated that
electricity comes to circulation pump (Figure -
2/3). Operating of circulation pump is provided by adjusting the thermostat of pump (Figure
-
2/11) to
zero degree.
3.5 By removing big yellow screw on the circulation pump, be sure that the
tip of motor
shaft taking place
inside turns. If it is not turning, shaft must be turned once with the screwdriver. Big yellow screw is
applied to its place when shaft starts to turn.
3.6 Air of the cores must be removed. Water level of expansion tank must be controlled.
3.7 Water is given
to
the
system from
boiler's inlet pipe (Figure
-
2/9) from service
water line.
3.8 After becoming sure that there is no leakage in the system, fuel is loaded to the firing chamber and
then the fire is set. Pump thermostat (Figure
-
3/10) is adjusted. Pump will start working when the
temperature of the water exceeds 40°C.
3.9 Temperature of the boiler's water (which is determinant for the temperature of the room) is adjusted
from
chain
driven thermostatic
regulator (Figure -
2/6). Chain driven thermostatic regulator automatically
controls burning speed of Central Pleating Stove and it maintains the heat of the water fixed at the
adjusted temperature.
3.10 In order to obtain
a good heat, coal must be preferred by having 6.000-7.000
kcal/hour value, having
less ash residue and it must be dry and without dust and must have orange and walnut size. Big
coal comforts air inlet.