VX-2R O
PERATING
M
ANUAL
69
Set Mode Item 26
[
M/T-CL
]
Function
: Selects the
MONI
key (just below the
PTT
switch) function.
Available Values
: MONI/T-CALL
Default
: Depends on the transceiver version.
MONI:
Pressing the
MONI
key causes the Noise/Tone Squelch to be over-ridden, allow-
ing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the
MONI
key activates a 1750-Hz burst tone, used for repeater access
in many countries (especially in Europe).
Set Mode Item 27
[
MW MD
]
Function
: Selects the method of selection of channels for Memory Storage.
Available Values
: NEXT/ LOWER
Default
: NEXT
NEXT:
Stores the data into the memory channel which is next-highest from the last-
stored memory channel.
LOWER: Stores the data into the next-available “free” channel.
Set Mode Item 28
[
NAME
]
Function
: Toggles the display indication between “frequency” and the channel’s “Alpha/
Numeric Tag.”
Available Values
: FREQ/ALPHA
Default
: FREQ
Set Mode Item 29
[
NM SET
]
Function
: Stores Alpha-Numeric “Tags” for the Memory channels.
See page 39 for details.
Set Mode Item 30
[
OPNMSG
]
Function
: Selects the Opening Message that appears when the radio is powered on.
Available Values
: DC/MSG/OFF
Default
: DC
DC:
DC supply voltage
MSG: Set by user. See below.
OFF: No Opening Message
Here’s how to program the Opening Message:
1.
Set this Set Mode Item to “MSG.”
2.
Press the [
V/M
] key momentarily to enable programming of the opening message. You
will notice the first character entry’s location blinking.
3.
Rotate the
DIAL
knob to select the first letter/number of the message, then press the
[
V/M
] key momentarily to save the first letter/number and move on to the next charac-
ter.
S
ET
M
ODE
S
UMMARY
S
ET
(
M
ENU
)
M
ODE
