VX-2R O
PERATING
M
ANUAL
39
M
EMORY
M
ODE
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
Labeling Memories
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1.
Recall the memory channel on which you wish to append a label.
2.
Press and hold in the [
H/L
] key for one second to enter the Set
mode.
3.
Rotate the
DIAL
knob to select the Set Mode Item labeled 29:
NM SET
.
4.
Press the [
H/L
] key momentarily to enable adjustment of this
Set Mode Item.
5.
Rotate the
DIAL
knob to select the first digit of the desired label.
6.
Press the [
V/M
] key to move to the next character.
7.
Repeat steps 5 and 6 to program the remaining letters, numbers,
or symbols of the desired label. A total of six characters may be
used in the creation of a label.
8.
If you make a mistake, press the [
BAND
] key to back-space the
cursor, then re-enter the correct letter, number, or symbol.
9.
When you have completed the creation of the label, press the
PTT
key to save the label and exit.
To display the alpha-numeric “Tag” (label):
1.
Set the
VX-2R
to the “MR” (Memory Recall) mode, and recall the desired channel.
2.
Press and hold in the [
H/L
] key for one second to enter the Set mode.
3.
Rotate the
DIAL
knob to select the Set Mode Item labeled 28:
NAME
.
4.
Press the [
H/L
] key momentarily to enable adjustment of this
Item’s setting.
5.
Rotate the
DIAL
knob to set this Set Mode Item to “
ALPHA
”
(thus enabling the alpha-numeric display).
6.
Press the
PTT
key to save the new setting and activate the al-
pha-numeric Tag.
To disable the alpha-numeric Tag (enabling the frequency display),
just repeat above procedure, rotating the
DIAL
knob to select “
FREQ
”
in step 5 above.
You may set up some memory channels to have their frequencies displayed,
while others may be set to have their Name Tag displayed; the selection within
Set Mode Item 28 is not applied to all memory channels at once.
